Smart home
KNX
Arvio talks to a KNX installation through its KNX IP interface, and ETS stays as it is. What KNX is, and what comes into Arvio.
KNX is a wired standard for building automation: a dedicated bus cable runs to every switch, sensor and actuator, and the devices talk to one another without a central box. It is planned with the building and installed by trained integrators. Arvio is a different kind of thing: a hub that brings together the devices a home already has or can easily get.
What the KNX driver does
The hub talks to the house's KNX IP interface on the local network, with no internet and no account. It listens to the bus and sends its commands to the group addresses of the ETS project.
ETS and the KNX programming stay as they are: Arvio changes nothing in them. It brings the KNX devices into the app and into the house's automations.
What comes into Arvio
- Lights, with on, off and brightness.
- Switches and sockets.
- Shutters and awnings, with up, down, stop and position.
- Thermostats, with a setpoint and on or off.
- Sensors: temperature, humidity, light, CO₂, power, energy, contacts, motion, presence, leak and smoke.
- What a wall switch or another system changes shows in the app at once, because the hub listens to the bus.
What it needs
- A KNX installation already programmed with ETS. Arvio does not replace ETS or the KNX integrator.
- A KNX IP interface or router on the hub's network, with one free tunnelling connection.
- The ETS project. The installer imports it in Arvio Partner, or types the group addresses. The file is read in the browser and is not uploaded.
- Status addresses on the actuators, so that every command is confirmed by the device itself.
If you are choosing
Building or gutting a house
With walls open and a budget for wiring, KNX gives you a system that depends on no hub and no radio. Ask a KNX integrator.
A house that is already finished
Arvio needs no bus cable: wireless and network devices, an installer, and an app. That is where it fits.
Both in one house
With a KNX IP interface, the KNX devices appear in Arvio next to the others. KNX keeps working by itself, whether the hub is on or not.
Next
Tell us about your space
Tell us what you have and what you want, and we will work out together what your space needs.
