Trust
Reliability
What Arvio does when the internet, the power or a driver fails: the rules, the mechanisms and the design targets.
On this page
A home has to keep working when the internet, the power or a piece of software fails. Here are the rules, the mechanisms and the design targets.
Works without the internet
- Lights, climate and covers connected locally
- Automations and scenes
- Wall panels
- The hub's logs
Needs the internet
- The Home app and remote access
- The TRU assistant
- Devices that talk to an internet service, such as the Ajax alarm and weather
- Notifications on your phone
When something fails
| If… | What happens |
|---|---|
| The internet or the cloud goes down | Lights, heating, automations and wall panels carry on from the hub. Arvio Home on your phone needs the internet to reach the house. |
| The power is cut | The hub starts by itself when power returns. On mini PCs this is a BIOS setting, and the installer tests it before handover. The outage is recorded in the log. |
| A driver crashes | Arvio Core restarts it, waiting longer each time, from 1 to 60 seconds. Core itself stays up. |
| Arvio Core hangs | If it stops reporting that it is alive for 30 seconds, the operating system restarts it. |
| The whole hub hangs | The board's hardware watchdog reboots it. |
| An update goes wrong | The hub goes back to the previous version without anyone asking. |
| There is no power or any way to reach it | We do not promise remote recovery. Nobody can reach a hub that is off from a distance. |
After a restart: read, never write
The rule is that a hub starting up changes nothing in the house.
No replay
There is no command queue for when the hub comes back. What did not run will not run later.
No restoring state
The hub does not put devices back as they were. A light comes on after a power cut only if the device itself does that.
Missed time stays missed
A 22:00 automation does not run at 22:30 because the hub was off at 22:00.
A returning device is not a trigger
When a device reappears after a restart, that starts no automations.
What happens to a command
One tap, one command
Each intention gets its own identifier. The app never resends by itself. Retrying is your choice and counts as a new command.
Hub offline
The cloud refuses it immediately and stores nothing.
Hub slow
The command waits until it expires: up to 45 seconds for comfort, 30 for security. Then the screen says it did not happen and offers a retry.
Only the hub confirms
The cloud accepting a command does not mean it happened. Done means the hub answered.
Updates that can go back
Arvio Core and drivers
The hub downloads the update, checks SFK's signature twice, switches version and waits for a healthy answer. If none comes, it puts the previous version back.
Arvio OS with two slots
The system is read-only and exists twice. A new version goes into the slot that is not running. The computer starts from it once and keeps it only if Arvio turns healthy within 5 minutes.
Your data stays
Data lives on its own partition and does not change through an update or a rollback. The database is fully synced to disk on every write, so a power cut does not damage it.
Design targets
| What | Target |
|---|---|
| Local control available | At least 99.9% a month |
| From command to device confirmation, locally (Zigbee, Shelly) | 95% of commands in under 1 second |
| Recovery with no one involved | Under 3 minutes |
| Updates that need a site visit | None |
| Data lost in a power cut | Only the last seconds of history |
| A crashing driver | Affects only its own devices |
The check before every release
Every release has to pass the same test before it goes out: 72 hours of continuous running, power cuts, killing and hanging Core and each driver, an update with a forced rollback, a day without internet, and a restore from backup.
One limit worth knowing: SFK's LAN drivers can share a process to use less memory. If that process goes down, they restart together, while Core stays up.
Read next
Tell us about your space
Tell us what you have and what you want, and we will work out together what your space needs.
